BOXLIGHT ProjectoWrite Spezifikationen PDF herunterladen (Seite 27)

Lamp information

Getting to know the lamp hour

When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by the

built-in timer.

To obtain the lamp hour information:

Press MENU and then press to the Information category

You will see the Equivalent lamp hour information displaying on the menu

To leave the menu, press MENU.

Timing for replacing the lamp

When a message appears “Please change the lamp”, please install a new lamp or consult your dealer. An old

lamp may cause a malfunction in the projector and in some instances the lamp may explode.

CAUTION

The Lamp indicator light and Temperature warning light will light up if the lamp becomes too hot. Turn the power off and let

the projector cool for 45 minutes. If the Lamp or Temp indicator still lights up after turning the power back on, please contact

your dealer. See "Indicators" on page 46 for details.

The following lamp warning displays will remind you to change the lamp.

Status Message

The lamp has been in operation for 2000 hours. Install a new

lamp for optimal performance. You may continue to operate

the projector. “Please change the lamp” will be shown every

time when the projector is on.

Replacing the lamp

To prepare a new lamp, contact your dealer for details.

Type number: OSRAM

E20.6

180-230W lamp

To reduce the risk of injuries to fingers and damage to internal components, use caution when

removing lamp glass that has shattered into sharp pieces. Before replacing the lamp, clean the lamp

compartment and dispose of cleaning materials. Be careful of sharp edges in the lamp compartment.

Wash hands after lamp replacement.

Only manufacturer certified lamps are tested with this projector. Use of other lamps may cause

electrical shock and fire.

Turn the power off and disconnect the projector from the wall socket before replace the lamp. Follow

with below instruction... Contact your dealer for details.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34 35

Keine Kommentare

BOXLIGHT ProjectoWrite Spezifikationen Seite 27